Lighting can bring amazing nighttime radiance to any pond and the features it illuminates. Lights can be put externally or inside, linked to a pond pump or free-floating. They will enhance the appearance and aesthetic of any pond if properly placed. They will highlight plants and things put on the banks or surrounding environment if appropriately positioned on the exterior of a pond. But, before adding lights to your pond, it is critical to carefully follow the manufacturer’s installation instructions. Here are a few suggestions to consider when using vijververlichting.
- Pick where to position your lighting. For optimum results and to avoid the effort of removing water from your pond to install the lights, finest effects come from those placed beneath a fountain to highlight the water as it falls down. A dramatic effect may also be achieved by placing vijververlichting along the margins of a pond facing a focal feature.
- Although outdoor lighting is frequently added after pond construction is complete, it is critical to incorporate it in the design phase so that all of the necessary wiring and waterproof plugs are installed during the construction process.
- Underwater illumination is powered by a transformer and a low-voltage wire, making the combination of water and electricity safe. To avoid water leaking, under-water lighting will also be totally sealed. Only use purpose made outdoor lighting and adheres to the same guidelines as with pond lighting.
- It is critical to position the fountain feature and pump on a sturdy flat platform inside the pond for fountain illumination.